Low Rib corrugated roll forming machine
Linear roll forming machine
its used to produce the low rip corrugated sheet for wall and roof panels
the machine can adjust the width according to the required panel type.
our JSR sandwich panel sheet forming machine make SMOOTH AND FLAT sheets, which allow final sandwich panel smooth and flat.
We also make fixed width LINEAR & LOW RIB ROLL FORMING MACHINE
Technical Details
| Machine Specifications | |
|---|---|
| Weight | About 5000kgs |
| Size | About 6m x 1.5m x 1.5m (length x width x height) |
| Color | Main color: blue |
| Warning color: yellow | |
| Suitable Raw Material | |
| Material | PPGI and PPGL Coils |
| Thickness | 0.3-0.8mm |
| Coil width | 1220mm |
| Yield Strength | 235Mpa |
| Main Technical Parameters | |
| Quantity of forming rollers stations | about 10 |
| Diameter of forming rollers shafts | 75mm |
| Roll Forming Speed | 15-20m/min |
| Forming rollers material | No.45 steel, coated with chromed treatment |
| Cutter material | CR12 mould steel, with quenched treatment |
| Controlling system | PLC and Converter |
| Electric Power requirement | Main motor power: 5.5kw |
| Hydraulic unit motor power: 3kw | |
| Electric voltage | According to customer’s requirement |
