Menu
Double layer forming machine in UAE
Double layer machine mean two roll forming machines sharing with one machine base and motor, one hydraulic station, one plc controller.
Therefore, double layer machine only work one layer at one time.
If production requirements are not big, or factory space is limited, double layer machine is good choose for two profiles.
This roll forming machine to manufacture single skin profile corrugate sheets TR35/200 & TR45/250(WALL& ROOF)
layout of double layer machine for your reference.
process: decoiler -forming- post cut- roofing sheets out
Hydraulic decoiler and stacker are available to enable machines’full automatically work with one worker operation.
| Machine Specifications | |
|---|---|
| Weight | About 12000kgs |
| Size | About 11m x 1.7m x 1.5m (length x width x height) |
| Color | Main color: blue |
| Warning color: yellow | |
| Suitable Raw Material | |
| Material | Colored Steel Coils |
| Thickness | 0.3-0.7mm |
| Coil width | 1220mm |
| Yield Strength | 2350Mpa |
| Main Technical Parameters | |
| Quantity of forming rollers stations | 20-22 |
| Diameter of forming rollers shafts | 75mm |
| Roll Forming Speed | 15-20m/min |
| Forming rollers material | No.45 steel, coated with chromed treatment |
| Cutter material | CR12 mould steel, with quenched treatment |
| Controlling system | PLC and Converter |
| Electric Power requirement | Main motor power: 7.5kw |
| Hydraulic unit motor power: 3kw | |
| Electric voltage | According to customer’s requirement |
