Menu
JSR Roofing Tile Ridge Cap Forming Line make ridge cap for roofing tile sheets,full automatically, high precision and long use life.
JSR forming machine make ridge cap automatically to different length, ridge cap covered on two roof come together,and prefabricate ridge cap will be stronger and save time in installation. this ridge cap is very popular for step tiles or roof tiles.
Ridge cap machine include 3 ton manual decoiler, forming machine with press and cut, hydraulic station, plc controller, run out table
mitsubishi or siemens control system.
Technical Details
| Machine Specifications | |
|---|---|
| Weight | About 7000kgs |
| Size | About 6m x 1.0m x 1.5m (length x width x height) |
| Color | Main color: blue |
| Warning color: yellow | |
| Suitable Raw Material | |
| Material | PPGI and PPGL Coils |
| Thickness | 0.4-0.6mm |
| Coil width | 610mm |
| Yield Strength | 235Mpa |
| Main Technical Parameters | |
| Diameter of forming rollers shafts | 65mm |
| Roll Forming Speed | 15-20m/min |
| Forming rollers material | No.45 steel, coated with chromed treatment |
| Cutter material | CR12 mould steel, with quenched treatment |
| Controlling system | PLC and Converter |
| Electric Power requirement | Main motor power: 4kw |
| Hydraulic unit motor power: 5.5kw | |
| Electric voltage | According to customer’s requirement |
No relate news.
