Composite metal floor deck has embossments designed to interlock with concrete slabs. The combination of floor deck and concrete serves the dual purpose of permanent form and positive reinforcement.
three common types of composite deck: 1.5 inch, 2 inch, and 3 inch.
1.5 Inch Composite Deck roll forming machine
1.5 inch Composite Deck, sometimes called Type B, is used for applications in outdoor flooring. It is the lowest profile type of composite deck, and is best used for short spans.
2 Inch Composite Deck roll forming machine
Compared to 1.5 inch, 2 inch composite deck is much stronger. It can hold up very thick concrete slabs, and is most often used for medium to long span applications in outdoor flooring.
3 Inch Composite Deck roll forming machine
3 inch composite metal deck is the deepest and most durable type of composite floor deck that is widely used in construction. It is typically used for long span applications in flooring.
Form deck serves as a permanent steel base for poured, reinforced concrete floor slabs.
Unlike composite deck, it does not have embossment. Additionally, instead of being interlocked within the concrete, form deck is used to support the weight of wet concrete that is poured on top of it to create flooring systems.
The three most common types are 9/16 inch, 1 inch, and 1.5 inch form deck.
9/16 inch steel form deck machine
1.5 Inch Composite Deck roll forming machine can also make 1.5 inch form deck only rise the emboss rollers.
Technical Details
| Machine Specifications | |
|---|---|
| Weight | About 15000kgs |
| Size | About 16m x 1.8m x 1.5m (length x width x height) |
| Suitable Raw Material | |
| Material | Galvanized or Galvalume Coils |
| Thickness | 0.8-1.2mm |
| Yield Strength | 235Mpa |
| Main Technical Parameters | |
| Diameter of forming rollers shafts | 90mm |
| Roll Forming Speed | 10-15/min |
| Forming rollers material | No.45 steel, coated with chromed treatment |
| Cutter material | CR12 mould steel, with quenched treatment |
| Controlling system | PLC and Converter |
| Electric Power requirement | Main motor power: 2x11kw |
| Hydraulic unit motor power: 5.5kw | |
| Electric voltage | According to customer’s requirement |
Steel deck or floor deck are widely use nowadays, for following advantage:
1.Reduce steel frame weight
2.No need formwork for concreting
3.Install speed faster
4.Safe working platform for workers.
JSR machinery factory manufacture all kinds of steel deck forming machine, or floor decking machine machine.
Operate easily , work automatically with PLC controller control.
Decoiler- forming – cut – run out
