steel door frame machine from Wuxi JSR machinery factory,
design and manufacture roll forming machines according to customers requirements.
for this door frame forming machine working speed about 4m/min,
process: decoiler material- leveling- hydraulic punch and cutting-forming
installation space about 35-40m
most important. the width and length of door frame can be adjusted on machine.
that is you can make different width steel door frame .
The most common door frame profile is a double rabbet, which are frames with two rabbets with a stop in between them. The rabbets can be equal or unequal.
Technical Details
| The Line’s Specifications | |
|---|---|
| Weight | About 18000kgs |
| Whole line’s dimension | About 35m x 3m x 1.5m (length x width x height) |
| Color | Main color: green |
| Warning color: yellow | |
| Suitable Raw Material | |
| Material | Galvanized or Galvalume Coils |
| Thickness | 0.8-1.2mm |
| Coil width | According to products size |
| Yield Strength | 235Mpa |
| Main Technical Parameters | |
| Quantity of forming rollers stations | About 22 |
| Diameter of forming rollers shafts | 75mm |
| Roll Forming Speed | 10-15m/min |
| Production Speed | about 4m/min |
| Forming rollers material | Gcr15 mould steel, with quenched treatment |
| Cutter material | CR12 mould steel, with quenched treatment |
| Controlling system | siemens PLC and Yaskawa Converter |
| Electric Power requirement | Main motor power: 15kw |
| Hydraulic unit motor power: 15kw | |
| Electric voltage | According to customer’s requirement |
| Main Components | |
| Decoiler (manual and automatic for options) | 1 set |
| Guiding device | 1 set |
| Leveling system motor 4kw | 1 set |
| hydraulic Punching machine with servo feeding 3kw | 1 set |
| Hydraulic Cutting system | 1 set |
| Roll Forming system motor 15kw | 1 set |
| PLC control box | 1 set |
| Hydraulic unit | 1 set |
| Run outs tables | 1 set |
No relate news.
